Industrial Air Cooled Chiller--62kw To 134kw

Categories: Air Cooled Environmental Industrial Chiller (HTI-A)
Brand:HERO-TECH
Model:HTI-25AD,HTI-30AD,HTI-40AD,HTI-50AD
Type:Air-Cooled
Certification:CE, Other
Cooling Capability(kw):60kw to 135kw


Detailed Info

Features of HTI series (standard industrial chillers):
· CE standard design,
· high COP:2.88 to3.0,
· R407c, friendly type refrigerant,
· Copeland or Danfoss world famous hermetic scroll compressor,
· Stainless steel pump,
· Stainless steel built-in tank,
· Door mounted disconnect switch,
· Original Schneider electrical components,
· Standard operating and safety controls
· Ventilated control cabinet
· Indoor operation
· Water-proof electrical chamber
· Removable panels for easy service access
· Tank level alarm/switch, High and Low pressure switch, Inner thermostat for compressor motor, three phase over current protection, compressor overload protection, fan overload protection(air cooled), pump overload protection
· Low noise and high efficiency finned tube condenser

Parameter table 

Model			HTI-25AD	HTI-30AD	HTI-40AD		HTI-50AD
nominal cooling capacity		kw	62.1	78.3	106.34		134.3
power source			3PH 380V-415V 50HZ
refrigerant	type		R407C,R410A
	control		Thermostatic expansion valve
compressor	type		hermetic scroll
	power	kw	10.8*2	13.62*2		18.78*2	23.6*2
condenser	type		finned copper tube + low noise outer rotor fan
evaporator	type		Copper coil built-in storage tank
	coolant flow	m3/h	10.06	13.6		17.75	21.9
	tank volume	liter	350	420		580	580
	inlet and outlet	inch	2-1/2	2-1/2		3	3
dimension	length	mm	2150	2150		2650	2200
	width	mm	1050	1050		1200	1780
	height	mm	2100	2100		2200	2200
weight		kg	810	890		1112	1320

KeyWords:

Air Cooled Industrial Chiller 62kw ,134kw Air Cooled Industrial Chiller ,Industrial Chiller 25ton ,Standard Industrial Chillers ,Water Chiller 30ton ,Industrial Water Chiller 40ton

Laser Chiller--air Cooled Chiller 50kw To 134kw

Categories: Laser Chiller
Brand:HERO-TECH
Model:HTL-20AD,HTL-25AD, HTL-30AD
Type:Air-Cooled
Certification:CE, UL, Other
Cooling Capability(kw):50KW TO 150KW


Detailed Info
Specification------Laser chiller---- air cooled

Product introduction


In laser system, laser source and beam controller would need to be cooled. Cooling water is normally required in the range of 15℃ to 22℃, with ±1℃ or ±2℃ accuracy and sometimes within ±0.1℃. Laser has special requirements for conductivity and corrosiveness of cooling water, normally water loop should be stainless steel materials.

Application

Laser chiller is mainly applied for laser marker, laser engraving machine, laser welder, laser cutting machine, laser ink jet machine, etc., for maintaining required temperature of laser equipment, so to ensure normal running.

Design features

¨ Large volume SS storage tank and SS coil evaporator.
¨ Built-in high pressure stainless steel chilled water pump, ensuring water quality and pressure.
¨ Well-known brand exhaust fan with large volume,excellent heat dissipation and low noise.
¨ Precision filtering device can be offered upon request, including particulate matter filtration and deionizer, ensuring high cooling water quality, extending laser and chiller's service life.
¨ Multi-protection devices: flow switch , water pressure switch, acoustic and optical alarm system.
¨ Protection signal output: water flow alarm signal output, water level alarm signal output, temperature protection alarm signal output, ensuring laser and chiller running safely.

Parameter table

Model			HTL-20AD	HTL-25AD		HTL-30AD
nominal cooling capacity		kw	51.8	59.5		84
power source			3PH 380V-415V 50HZ
refrigerant	type		R22
	control		Thermostatic expansion valve
compressor	type		hermetic scroll
	power	kw	8.96*2		10.08*2	13.62*2
condenser	type		finned copper tube + low noise outer rotor fan
evaporator	type		stainless steel tank with copper coil built-in or Plate heat exchanger
	coolant flow	m3/h	8.84		10.06	13.6
	Tank volume	liter	350		350	420
	inlet and outlet	inch	2		2-1/2	2-1/2
dimension	length	mm	1950		2150	2150
	width	mm	950		1050	1050
	height	mm	1960		2100	2100
weight		kg	650		1112	1320

KeyWords:

Laser Chiller Air Cooled 50kw ,Laser Chiller Air Cooled 134kw ,Laser Chiller Air Cooled ,Laser Chiller 50kw ,Laser Chiller 134kw ,Laser Chiller 78kw

Air Cooled Low-temp Chiller 40HP To 60HP

Categories: Air Cooled Low Temperature Screw Chiller (HTSL-A)
Brand:HERO-TECH
Model:40HP 50HP 60HP
Type:Air-Cooled
Certification:Other
Cooling Capability(kw):32KW TO 95KW

Detailed Info

Air cooled low-temperature chiller

Specification

Model			HTSL-100A	HTSL-130A	HTSL-140A
nominal cooling capacity	-10C	kw	64	85	92
	-20C		43	56	61
	-30C		32	42	45
power source			3PH 380V 50HZ
refrigerant	type		R22、R404A
	control		Thermostatic expansion valve
compressor	type		Semi-hermetic screw
	power	kw	40	50	55
condenser	type		finned copper tube + low noise outer rotor fan
evaporator	type		Shell and tube
	inlet and outlet	inch	3	3	4
dimension	Length	mm	2650	2200	2500
	Depth	mm	1200	1760	1850
	Height	mm	2200	2200	2150
weight		kg	1350	1650	1950

Remarks:
1. norminal cooling capacity according to:
coolant temperature difference from 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C ambient temperature;
3. Specification, appearances and dimensions are subject to change without notice.

KeyWords:

Air Cooled Low-temp Chiller 40hp ,Air Cooled Low-temp Chiller 60hp ,-30C Air Cooled Screw Chiller ,Low Temperature Industrial Chiller ,-20C Air Cooled Screw Chiller ,-10C Air Cooled Screw Chiller

Screw Chiller---AIR COOLED 140kw To 220kw

Categories: Air Cooled Screw Chiller (HTS-A)
Brand:HERO-TECH
Type:Air-Cooled
Certification:CE, UL, Other
Cooling Capability(kw):160KW to 220KW


Detailed Info

screw chiller AIR COOLED

Design Features
¨ W shape aluminum fin type condenser, assuring adequate heat exchanging area within smaller unit size
¨ High efficient evaporator with internal thread copper tube.
¨ Large air volume axial fan with metal blades. Motor separated from net-cover, fixed on exhaust port by metal
¨ Siemens PLC control, LCD touch screen interface.
¨ Standard design charged R22, CFC Free R407C, R410A,R404A,R134A for option.
¨ 380V-415V/50HZ 3PH for standard design. Different design on customers' request.

Parameter table

Model			HTS-170A	HTS-190A	HTS-220A
nominal cooling capacity		kw	167	184	216
power source			3PH 380V 50HZ
refrigerant	type		R22
	control		Thermostatic expansion valve
compressor	type		Semi-hermetic screw
	power	kw	67	73	82
condenser	type		finned copper tube + low noise outer rotor fan
evaporator	type		Shell and tube
	Flow rate	m3/h	28.7	32.2	37.2
	inlet and outlet	inch	4	4	4
dimension	Length	mm	2950	3200	3500
	Depth	mm	1950	1950	1950
	Height	mm	2200	2200	2200
weight		kg	2200	2350	2550

Remarks:

1. norminal cooling capacity according to:

coolant inlet inlet 7C, outlet 12C, temperature difference from 3C to 8C;

cooling air inlet 30C, outlet 38C;

2. chiller should be used under 40C ambient temperature;

3. Specification, appearances and dimensions are subject to change without notice.

KeyWords:

Screw Chiller Air Cooled 140kw ,Screw Chiller Air Cooled 220kw ,Screw Chiller 80hp ,Screw Chiller Equipment ,Air Cooled Screw Chiller ,Air Cooled Hanbell Chiller

Air Cooled Laser Chiller

Categories: Laser Chiller
Brand:HERO-TECH
Model:HTL-20AD,HTL-25AD, HTL-30AD
Type:Air-Cooled
Certification:CE, UL, Other
Cooling Capability(kw):50KW TO 150KW


Detailed Info
Specification------Laser chiller---- air cooled

Product introduction


In laser system, laser source and beam controller would need to be cooled. Cooling water is normally required in the range of 15℃ to 22℃, with ±1℃ or ±2℃ accuracy and sometimes within ±0.1℃. Laser has special requirements for conductivity and corrosiveness of cooling water, normally water loop should be stainless steel materials.

Application

Laser chiller is mainly applied for laser marker, laser engraving machine, laser welder, laser cutting machine, laser ink jet machine, etc., for maintaining required temperature of laser equipment, so to ensure normal running.

Design features

¨ Large volume SS storage tank and SS coil evaporator.
¨ Built-in high pressure stainless steel chilled water pump, ensuring water quality and pressure.
¨ Well-known brand exhaust fan with large volume,excellent heat dissipation and low noise.
¨ Precision filtering device can be offered upon request, including particulate matter filtration and deionizer, ensuring high cooling water quality, extending laser and chiller's service life.
¨ Multi-protection devices: flow switch , water pressure switch, acoustic and optical alarm system.
¨ Protection signal output: water flow alarm signal output, water level alarm signal output, temperature protection alarm signal output, ensuring laser and chiller running safely.

KeyWords:

Laser Chiller Air Cooled 50kw ,Laser Chiller Air Cooled 134kw ,Laser Chiller Air Cooled ,Laser Chiller 50kw ,Laser Chiller 134kw ,Laser Chiller 78kw

Air Cooled Low-temp Chiller 40HP To 60HP

Categories: Air Cooled Low Temperature Screw Chiller (HTSL-A)
Brand:HERO-TECH
Model:40HP 50HP 60HP
Type:Air-Cooled
Certification:Other
Cooling Capability(kw):32KW TO 95KW

Specification

Model			HTSL-100A	HTSL-130A	HTSL-140A
nominal cooling capacity	-10C	kw	64	85	92
	-20C		43	56	61
	-30C		32	42	45
power source			3PH 380V 50HZ
refrigerant	type		R22、R404A
	control		Thermostatic expansion valve
compressor	type		Semi-hermetic screw
	power	kw	40	50	55
condenser	type		finned copper tube + low noise outer rotor fan
evaporator	type		Shell and tube
	inlet and outlet	inch	3	3	4
dimension	Length	mm	2650	2200	2500
	Depth	mm	1200	1760	1850
	Height	mm	2200	2200	2150
weight		kg	1350	1650	1950

Remarks:
1. norminal cooling capacity according to:
coolant temperature difference from 3C to 8C;
cooling air inlet 30C, outlet 38C;
2. chiller should be used under 40C ambient temperature;
3. Specification, appearances and dimensions are subject to change without notice.

KeyWords:

Air Cooled Low-temp Chiller 40hp ,Air Cooled Low-temp Chiller 60hp ,-30C Air Cooled Screw Chiller ,Low Temperature Industrial Chiller ,-20C Air Cooled Screw Chiller ,-10C Air Cooled Screw Chiller

Water Cooled Screw Chiller HTS-W

Categories: Water Cooled Screw Chiller (HTS-WD)
Brand:HERO-TECH
Type:Water-Cooled
Certification:CE, UL, Other
Cooling Capability(kw):100KW TO 350KW


Detailed Info
water cooled screw chillers
Application
◆Medium and large scale industrial cooling
◆Central air conditioning system
◆Cold room, thermostatic chamber

Design Features
¨ W shape aluminum fintype condenser, assuring adequate heat exchanging area within smaller unitsize
¨ High efficient evaporator with internal thread copper tube.
¨ Large air volumeaxial fan with metal blades. Motor separated from net-cover, fixed on exhaustport by metal
¨ Siemens PLC control,LCD touch screen interface.
¨ Standard designcharged R22, CFC Free R407C, R410A,R404A,R134A for option.
¨ 380V-415V/50HZ 3PHfor standard design. Different design on customers' request.

Water cooledscrew type chiller

Model	Cooling capacity (kw)	Compressor power(kw)	Evaporator		Condenser		Dimension (L*W*H) (mm)	Weight (kg)
			Coolant flow(m3/hr)	Coolant in/out(inch)	Cooling water flow(m3/hr)	Cooling water in/out(inch)		N.W	R.W
HTS-130W	125	30	21.5	3	26.7	3	2500*780*1650	900	1050
HTS-160W	164	38	28.2	3	34.7	3	2550*780*1650	1050	1200
HTS-180W	178	42	30.6	4	37.8	4	2600*780*1650	1200	1400
HTS-220W	217	51	37.3	4	46.1	4	2750*780*1650	1550	1800
HTS-240W	239	56	41.1	4	50.7	4	2800*950*1800	1800	2100
HTS-280W	281	63	48.3	4	59.2	4	2800*950*1950	1900	2200
HTS-330W	325	73	55.9	5	68.4	5	2900*950*1950	2050	2350
HTS-350W	352	80	60.5	5	74.3	5	3000*1200*1580	2350	2530
HTS-390W	387	88	66.6	5	81.7	5	3000*1200*1580	2500	2700
HTS-460W	461	103	79.3	5	97	5	3100*1250*1630	2500	3000
HTS-490W	487	109	83.7	5	102.5	5	3300*1380*1630	2650	3100
HTS-580W	577	127	99.2	5	121.1	5	3500*1380*1750	2850	3350
HTS-600W	600	131	103.2	6	125.7	6	3800*1380*1750	3150	3750
HTS-700W	698	151	120	8	146	8	3900*1380*1750	3350	4000
HTS-770W	766	167	131.7	8	160.4	8	4100*1450*1780	3620	4300
HTS-820W	818	177	140.7	10	171.1	10	4300*1480*1780	3850	4600
HTS-920W	922	199	158.6	10	192.8	10	4500*1480*1780	4160	5000

Cooling capacity is based on: Coolant leaving/returningtemperature 7℃/12℃.
Cooling water leaving/returningtemperature 30℃/25℃.
Condensingtemperature: 40℃.

KeyWords:

Hts Water Cooled Screw Chiller ,Water Cooled Screw Chillers ,Water Cooled Chilling Unit ,Screw Chiller